Ador Group Alliances Gallery Green Environment
  PRODUCTS
  › Consumables
  Welding-cutting Equipment
  Automation
  Wear Resistant Products
  Wear Resistant Alloys
  Ceramics
  Wearplates
  Flux Cored Wires
  Safety Products
  Thermal Spray
 
  Flux Cored Arc Welding Products

FCAW (Flux cored arc welding) is a process that uses continuously fed welding consumables, with flux at its core. There are two varieties, one with no shielding gas and the other with shielding gas, with the latter being more predominant. In self-shielding, continuous tubular wire filled with flux is used in spool form. The wire is fed continuously in to the arc by means of a special wire feeder. The arc is struck by applying wire on to the job. The heat of the arc melts the wire and forms a weld puddle. The flux core essentially has the same functions as external coating on a stick electrode. The other alloying elements added in the flux, provides desired mechanical properties to the weld metal. The self-shielding flux-cored arc welding process is popular in fabrication, reclamation welding, hard facing and surfacing applications.

 
O-1044 - Self-shielded low alloy flux cored wire with impact properties
 
O-1050 - Self-shielded flux cored wire for low and medium carbon steels
 
 
O-2060 - Unique alloy for high strength and extreme crack resistance
 
 
O-2061 - Self shielding flux cored welding wire for joining armour steel
 
 
O-7015 - Self shielding flux cored welding wire for surfacing and joining manganese steel
 
 
O-7030 - Machinable self shielding flux cored welding wire for built-up and buffer layers
 
 
O-7020 - Work hardening self shielding flux cored welding wire for surfacing and joining of manganese steel
 
O-7050 - Work hardening self shielding flux cored welding wire for impact
 
 
O-7026 - Self-shielded flux cored wire for impact applications
 
 
O-7065 - Work hardening, self shielding flux cored welding wire for high temperature applications
 
 
O-7055 - Work hardening, self shielding flux cored welding wire for abrasion and impact at elevated temperatures
 
O-7060 - Self shielding flux cored welding wire for hardfacing
 
 
O-7062 - Self shielding flux cored welding wire for severe abrasion
 
 
O-7075 - Self shielding flux cored welding wire for tungsten carbide deposit
 
  WF-90: Open Arc Welding Wire Feeder
Suitable for AC or DC and Constant Potential or Drooping Characteristic welding power sources. (Min. OCV for AC power source should be 80 volts)
Sturdy and reliable 4 grooved gear roll drive system to get smooth wire feeding without slippage
Portable, light weight and compact
Very easy and fast installation. No auxiliary voltage required
Facility for wire inching by a separate push button
Fine tuning regulator knob for the most optimum parameters setting
Will also work with 'constant potential' power sources as used with MIG welding sets
  Site Map Disclaimer Terms of Use © Ador Fontech Limited 2015