ALUMINIUM & ALUMINIUM ALLOYS

TIG/MIG 400

Pure aluminum filler rod / wire for oxy-acetylene, TIG and MIG welding processes

TECHNICAL DATA

Source of heat: Oxy-acetylene/TIG torch

Flux: Flux 200 (paste)

TYPICAL APPLICATIONS

Used for welding pure aluminum, 1000 series, Al 99.8, Al 99.7, Al 99.5,E-Al. Tanks, brackets, bus bodies etc. Preheat thick plates (over 15 mm) to 150ºC.

aluminium brackets

TIG/MIG 401

Al-Mg filler rod / wire for TIG / MIG welding-high strength and resistance to seawater corrosion

TYPICAL APPLICATIONS

Used in ship building, off shore, cryogenic equipment, aluminum bridges, railway constructions, automobile industry, welding of AlMg 4, 5Mn, AlMg
5, AlMg 2MnO2, AlZnMg1, AlZnMgCuO,5, AlMgSiO, 5, AlMgSil, G-AlMg10,
G-AlMg5, G-AlMg3Si, G-AlMg5 Si.

Sea water applications

TIG/MIG 402

Al-Mg filler rod / wire for TIG / MIG welding processes

TYPICAL APPLICATIONS

Used for welding aluminum magnesium alloy base metal. All elements of this alloy are closely controlled for optimum weld strength. Applications in

defense, general constructions, marine and structural industry. Welding of rolled and cast Al- Mg alloys such as AlMg4.5 Mn, AlMg5, AlZn4.5Mg1, AlMg5 Mn, AlMg2.7Mn, AlMgSi1 can be accomplished.

Welding of rolled and cast aluminium

TIG/MIG 404

Al-Mg alloy filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA

Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

Used for welding aluminum magnesium alloy base metal as per DIN 1725
Bl. 1 and Bl. 2, e.g. Al Mg 3, Al Mg 5, Al Mg Mn, Al Zn Mg 1, G-Al Mg 3/ +Si/ + Cu, G-Al Mg 5/ +Si, G-Al Mg 10, Al Mg Si1. Tank construction, aluminum structures, vehicle body building, shipbuilding, window manufacture etc.

Preheat plates exceeding 15 mm thickness to at least 150ºC.

aluminium structures

TIG/MIG 405

Al-Si alloy filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA

Electrical conductivity: 21 Sm/mm2

Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

Used for welding Al Si 5, Al Mg Si 0.5, Al Mg Si 0.8, Al Mg Si 1. Al & alloys with less than 2% alloying elements, cast aluminum alloys with up to 7% silicon content. Preheat plates exceeding 15 mm in thickness to approx. 150ºC.

Automobiles body fabrication

TIG/MIG 406

Al-Cu filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA

Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

TIG/MIG 406 used for naval applications, instruments, tanks, radars etc.

Naval applications

TIG/MIG 407

Al-high Silicon filler rod / wire for TIG/MIG welding processes

TECHNICAL DATA

Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

Used for welding cast aluminum alloys with more than 7% Si content. Tank construction, air conditioning equipment, domestic appliances, plates, tubes, profile sections. Preheat thick plates and large work pieces to approx. 150-180ºC.

Tank construction and piping

TIG/MIG 408

Al-Si alloy filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA

Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

Used for repairs and filling up cavities on Al-Si castings with more than 7% Si content. In special cases aluminum alloys with less than 2% alloying elements are also welded.

aluminium casting repair

TIG/MIG 804

Al-Mg alloy filler rod / wire for TIG / MIG welding processes

TYPICAL APPLICATIONS

Used for welding aluminum magnesium alloy base metal as per DIN 1725
Bl. 1 and Bl. 2, e.g. Al Mg 3, Al Mg 5, Al Mg Mn, Al Zn Mg 1, G-Al Mg 3/ +Si/ + Cu, G-Al Mg 5/ +Si, G-Al Mg 10, Al Mg Si1. Tank construction, aluminum structures, vehicle body building, shipbuilding, window manufacture etc. Preheat plates exceeding 15 mm thickness to at least 150ºC.

vehicle body building

TIG/MIG 805

Al-Si alloy filler rod / wire for TIG / MIG welding processes

TECHNICAL DATA

Melting range 570-625ºC

TYPICAL APPLICATIONS

Used for welding Al Si 5, Al Mg Si 0.5, Al Mg Si 0.8, Al Mg Si 1. Al & alloys with less than 2% alloying elements, cast aluminum alloys with up to 7% silicon content. Preheat plates exceeding 15 mm in thickness to approx. 150ºC.

Heavy vehicle body building

TIG/MIG 807

Al-high Silicon filler rod / wire for TIG/MIG welding processes

TECHNICAL DATA

Melting range: 590-625ºC

Electrical conductivity: 21 Sm/mm2

Shielding gas: Welding grade argon

TYPICAL APPLICATIONS

Used for welding cast aluminum alloys with more than 7% Si content. Tank construction, air conditioning equipment, domestic appliances, plates, tubes, profile sections. Preheat thick plates and large work pieces to approx. 150-180ºC.

welding cast aluminium
Ador Fontech Logo

CONTACT US

ADOR FONTECH LIMITED

Belview, 7 Haudin Road, Bangalore-560042

Tel: 080 25596045/73

Fax: 080 25597085

E-mail: customerservice@adorfon.com

Submitting Form...

The server encountered an error.

Form received.

Ador Fontech Limited © 2017 Privacy Policy

Ador Fontech Limited

Belview, 7 Haudin Road, Bangalore-560042

Tel: 080 25596045/73 Fax: 080 25597085

Fax: 080 25597085

E-mail: customerservice@adorfon.com

CONTACT US

ADOR FONTECH LIMITED

Belview, 7 Haudin Road, Bangalore-560042

Tel: 080 25596045/73

Fax: 080 25597085